If you have a small business and you’re looking for ways to cut down on your water usage, then installing a plumbed eyewash station might be a good option for you. In this article, we’ll show you how to install a portable eyewash station, and we’ll also provide some tips for using it correctly.
What is a plumbed eyewash station?
A plumbed eyewash station is a handy piece of equipment that can be installed in any location. Portable plumbed eyewash stations are perfect for businesses and events. They are also a great way to provide eyewash service to people who are unable to get to a centralised station.
How to install a plumbed eyewash station?
In order to provide portable eyewash facilities for visitors to a site, it is necessary to install a plumbed eyewash station. The installation process for this type of station is fairly straightforward, and can be completed in just a few steps.
To begin, you will need to locate an existing water supply pipe or tubing. This can be anything from a garden hose to an old water line that runs between buildings. Once you have located the pipe, mark the location on the ground where you plan to install the eyewash station.
Next, connect the eyewash station piping to the water supply line. Be sure to use a watertight connection, as leaks could cause major flooding problems. Once the piping is connected, turn on the water supply and test the system for leaks. If everything looks good, lay out protective mats and construction materials around the area where the eyewash station will be installed.
Now it’s time to install the station itself. Begin by digging a hole that is slightly larger than the station itself. Once the hole has been dug, place the station into it using supports that have been prepared beforehand. Make sure that all connections are properly made.
Local plumbers near Charleston SC can also help to install a plumbed eyewash station by ensuring that the water supply lines are properly installed and connected to the eyewash station. The plumber can also ensure that the drainage lines are properly installed and connected to the eyewash station.
Tips for finding local plumbers to install plumbed eyewash station
There are a few things to keep in mind when looking for local plumbers near Charleston SC to install a plumbed eyewash station. First, it is important to find a licensed and insured plumber. This will ensure that the work is done properly and that you are protected in case of any accidents or damages. Second, ask for referrals from friends, family, or your local hardware store. This can help you narrow down your search to a few reputable companies. Finally, get multiple estimates before making your final decision. This will allow you to compare pricing and services offered by different plumbers.
Tips for using a plumbed eyewash station
When you’re on the go, a portable plumbed eyewash station can be a life saver. Here are tips for using this life saving device:
– Make sure the eyewash is fully charged before you use it. A full tank of water will give you up to 30 minutes of use.
– Find a secure spot to set the station up. You don’t want it toppling over while someone is using it!
– Plug in the eyewash and wait for it to fill up with water. The indicator light will turn green when it’s ready.
– Aim the spray head towards your face and hold down the button to start spraying. Release the button when you’re finished to stop the flow of water.
– Make sure you rinse your face thoroughly with plenty of cold water after using the eyewash station.
Conclusion
A plumbed eyewash station is a great way to keep your staff safe and comfortable when working in areas with hazardous chemicals. It’s also very portable, so you can move it around as needed. In this article, we showed you how to install a plumbed eyewash station.
