We hear such Orbi pink, white, purple and orbi Blue light issues most often by many users. Mostly, They are complaining about Orbi Blue light issue in their Wi-Fi routers. There can be some technical glitches behind such problems. But it is not something to worry about. It can be due to a slow or weak Wi-Fi network, Orbi firmware update issues, and a blocked internet connection. You can sort it out by following some measures while logging in to your Orbi setup ac3000 router described below.
Follow these measures to troubleshoot the Orbi Blue light
- Firstly, connect your computer to your Orbi setup with a Mesh Wi-Fi router either wirelessly or wired using an Ethernet cable.
- Secondly, your router should be powered on properly. Solid blue LED on your Orbi Mesh Wi-Fi router indicates that it is powered.
- Your computer should not be connected to any other wireless network. Never leave your Orbi firmware on an obsolete version.
- Disconnect all the entire devices from all other networks, then try to connect one by one after getting access to your router.
- Check if you are still facing Orbi Blue light issues, then try rebooting the router, and try Orbi Netgear login
- Sometimes there are problems with our web browser also. To remove this problem, you have to uninstall the browser.
- Or you can try the Orb login process in another web browser other than the one installed on your smart device.
- Another step is to reset the router to its default settings. You can do it either by pressing the WPS or reset button.
- You can even use a Smart setup wizard to reset the router. Press the reset tab for not less than 10 to 15 seconds. And then, you can release it to get your router to default.
- If still, the problem persists, then you have one more option. That is, disconnect your router from the Ethernet cable.
Configure your internet connection properly to fix the Orbi Blue light error?
Internet blockage on your Orbi Wi-Fi router is a disappointing cause to arise to such light errors in your Orbi Wi-Fi Mesh router. You have to check your internet connection and talk to your ISP to solve the issue. Also, enable the auto Orbi firmware update option in your router. Moreover, we have given some of the most appealing measures to resolve Orbi Blue light issues from your router.
- There can be many solutions for this issue, and many reasons can push this issue to occur.
- As the first solution, you need to reboot the router by removing the power adapter from the electric outlet, and then you have to plug it in again.
- You can also use the factory default setting process by pushing the reset button available on your router.
- Press and hold the button for 8 to 10 seconds. And then release it slowly to get the router to its previous condition.
- Try to input a static IP address into your router’s internet connection. You can get the static IP address from your ISPs.
- Next, you need to configure your Orbi login page using the DSL cable connection.
- If you are using PPPoE mode, manually configure the Orbi Wi-Fi connection to obtain your username and password.
- The next step is to clone the MAC address of your computer, router, or the other devices that are attached to your Wi-Fi network.
- Go to Settings, then the IP Settings, Internet Network called WAN, and select Automatic or Dynamic DHCP from the menu bar.
- Here you can clone the MAC address by visiting the DNS settings.
Apart from the above solutions, you should check your Orbi firmware update. Finally, the above measures are 100% accurate and will resolve your Orbi Blue light issue. After that, the Orbi Netgear login process becomes easy. If you did not get any solution even after performing the above steps, stay in touch with our customer care executives. They are highly trained and professional in their work.
