What Does Integrated Drive Electronics (IDE) Mean?
Integrated Drive Electronics is a standard point of interaction for interfacing a motherboard to capacity gadgets like hard drives and CD-ROM/DVD drives. Shop online new and renovated IDE Cable in India. The unique IDE had a 16-digit interface that associated two gadgets to a solitary strip link. This practical IDE gadget conveyed its own hardware and incorporated a coordinated circle drive regulator. Before IDE, regulators were isolated outside gadgets.
IDE’s advancement expanded information move rate (DTR) speed and decreased stockpiling gadget and regulator issues.
IDE is otherwise called Advanced Technology Attachment (ATA) or wise drive hardware (IDE).
IDE Cables interface from the motherboard of a PC to the hard drive, disc drive or potentially floppy drive. IDE represents Integrated Drive Electronics.
IDE is a standard point of interaction that interfaces the PC motherboard to a capacity gadget. The most well-known of these sorts of links are the 34-pin floppy drive link that interfaces from the motherboard to the floppy drive and the 40-pin strip link that associates from the motherboard to the hard drive and additionally the album drive. The image underneath shows both of these links.
The IDE link is a kind of AT Attachment which has speeds from 33, 66, 100 and 133 MB/s. A quicker link can go in a more slow hard drive yet a more slow link will diminish the speed of a quick hard drive.
One IDE strip link can interface a hard drive and a cd drive to the motherboard, it can likewise associate two hard drives to the motherboard. To do this effectively the jumpers should be arranged accurately. However, To completely comprehend jumpers go to this page and snap here to figure out how to introduce IDE links into your PC.
IDE and Floppy Drive Cables
This is a heritage page. The data on this page is outdated and doesn’t have any significant bearing to the vast majority constructing another PC these days. Basically nobody utilizes floppy drives or EIDE drives any longer. However, I’m leaving it up for verifiable reasons and on the grounds that the site details demonstrate that certain individuals actually look for this data.
IDE Ribbon Cables
IDE/EIDE links are utilized to associate more established style PATA hard drives and other PATA gadgets, for example, optical drives, tape drives, or ZIP drives to the PC’s motherboard.
Customarily, IDE links were level, dark, strip type connectors. More established (ATA-33) IDE links had 40 guides and forty pins. However, fresher ATA-133 EIDE links have 80 guides, yet because, at the same time have forty pins. The fresher links should be utilized with EIDE parts. If not, they will work at lower, heritage speeds.
The shaded stripe along one edge of the link lines up with nail number one to the gadget and motherboard connectors. Howecer, there likewise is a tab on the link connector and a score on the drive or motherboard that makes it troublesome (however not difficult) to interface the link in reverse.
There are additionally round IDE links that don’t meddle such a great amount with wind current inside the PC and are to some degree more straightforward to course generally speaking.
EIDE Cable Connector Color Code
Most 80-guide EIDE links have variety coded connectors:
The blue connector gets joined to the motherboard.
The dark connector appends to the expert drive or gadget.
The dark connector joins to the slave drive or gadget.
The drive positions on more seasoned, 40-guide IDE links not entirely settled by their general situations along the link:
The helter-skelter center connector gets joined to the slave gadget.
The connector nearest to the center connector gets joined to the expert gadget.
The connector farthest from the center connector gets joined to the motherboard.
Floppy drive links seem to be IDE links aside from that they are a little smaller, have just 34 guides, and have a curve toward the finish of the link that joins to the drives. They might have from two to five connectors: one to append to the motherboard, and upwards of four drive connectors. However, just two of which can be utilized at a time.
The explanation there are a bigger number of connectors than the quantity of drives upheld is that preceding the appearance of hard drives, most PC’s had two floppy drives (A: and B:), the two of which were associated with a solitary regulator by a similar link.
Whenever the antiquated 5.25-inch floppy drives were supplanted by 3.5-inch drives (which have various connectors). Link producers started remembering the two kinds of connectors for floppy drive links. So a similar link could have one connector for the motherboard. Two connectors for 5.25-inch drives, and two connectors for 3.5-inch drives. Be that as it may, the all out number of floppy drives is as yet restricted to two. The unused connectors essentially hang inside the case.
Since few PCs today have two floppy drives (most don’t have one any longer). And the majority of us haven’t seen a 5.25-inch drive in years. Most floppy links made in this century have just two connectors. The end with the wind gets joined to a 3.5-inch floppy drive. And the opposite end gets appended to the motherboard or floppy drive regulator.