Roller shutter garage doors are becoming increasingly popular, as they provide a sleek and modern look to your home. However, like any other type of door, roller shutter garage door maintenance is regularly required in order to keep them functioning smoothly. If you’re not familiar with how to maintain a roller shutter garage door, read on for tips on how to do it!
What is a Roller Shutter Garage Door?
A roller shutter garage door is a type of garage door that uses a large, heavy roller to close and open the door. It is more expensive to maintain than a traditional garage door, and it may not be ideal for areas with high wind or snow loads.
When should I service my Roller Shutter Garage Door?
Service your roller shutter garage door every 6 months or 1,000 cycles, whichever comes first. So that it keeps the door in good working order and protects it from corrosion and rust. If there are any problems then you need roller shutter door repair.
Types of shutter garage doors
There are two types of roller shutter garage doors: manual and electric. Here’s a closer look at each type:
Manual roller shutter garage doors are operated by a door operator or remote control. These doors typically have a metal gate that opens and closes using a pair of rollers. Manual roller shutter garage doors can be opened manually with the use of your hands or with a house key, but it also does not close automatically. They are the most common type of roller shutter garage door and are the least expensive to operate.
Electric roller shutter garage doors are operated by an electric motor. It also has a metal gate that opens and closes using a pair of rollers. Electric roller shutter garage doors can be opened either with the use of remote control or by pressing a button on the wall near the door. They can also be closed automatically by pressing a button on the wall near the door. Like manual roller shutter garage doors, electric roller shutter garage doors can be opened manually with the use of your hands or with a house key, but they cannot be closed automatically.
How to clean and maintain.
If you have a roller shutter garage door, you will need to clean it regularly in order to keep it running smoothly. Follow these steps for your roller shutter garage door maintenance. :
- Remove any debris or dust that may be on the door.
- Pour a pot of hot water onto the surface of the door, and wet the entire surface.
- Apply pressure with a cloth or sponge to clean the surface.
- Rinse the surface with cold water and dry it off.
How to replace a roller garage door spring
If you find that your roller shutter garage door is not opening or closing smoothly, then it is time to replace the spring.
First, close the door so that it’s in the closed position. Then, remove the two screws that hold the top panel in place. This panel can now lift off and set aside.
Next, locate the two springs that are attached to the motor shaft. The left spring is attached to a bracket on the motor housing and the right spring is attached to a bracket on the opposite side of the motor housing. Then use a screwdriver to pry them off of their brackets and set them aside.
Now, take a look at the motor housing. You’ll see two metal plates that slide onto each other when the door is closed. The upper plate has a hole in it and the lower plate has a hole in it as well. So that the springs go through these holes and attach to metal pins on either side of the motor housing.
To replace the springs, first, remove the old ones by pushing them out of their respective holes with your screwdriver. Then, insert new springs into their respective holes and push
We have an expert team that can perform roller garage door repairs if it is not easy for you. You can call our numbers and ask for them.
How to replace a roller shutter garage door seal
A roller shutter garage door is a great option for people who want an easy way to open and close their garage door. However, like any other type of garage door, it can eventually need to be replaced. The seals on a roller shutter garage door are particularly prone to failure, so it’s important to replace them regularly. Here’s how to do it:
- Clear the area around the door of any obstructions, like cars or bikes.
- Remove the old seal by prying it up from the tracks with a screwdriver or a chisel. But also careful not to damage the tracks themselves.
- Install the new seal by pressing it into place against the tracks and screwing it in place with a screwdriver or a drill bit. Be sure to tighten the screws evenly so that the seal is secure.
- Reattach the trim pieces by pressing them into the slots on the door as well as screwing them in place with screws (or using adhesive if you don’t have screws).
- Test your new seal by closing and opening your garage door several times—it should now operate smoothly and without noise.
Emergency repair and service
If you have a broken door or need an emergency garage door repair, we provide 24/7 emergency roller shutter door service. You can call our customer representatives, they will listen to you and book an appointment. Best estimates are provided by our expert team at reasonable rates. Rest our trained team takes care of. So don’t worry, call us any time in case of an emergency.